Kitchen cabinet design skills

橱柜在厨房里不仅可以收纳，而且还有装饰作用，而橱柜的设计上尺寸是非常重要的，尺度的精确直接影响到橱柜的美观以及厨房的布局。今天，小编来为大家说说关于橱柜的设计技巧以及注意事项。

The cabinet can not only be collected in the kitchen, but also has the function of decoration, and the design size of the cabinet is very important. The precision of the scale directly affects the beauty of the cabinet and the layout of the kitchen. Today, Xiaobian comes to tell you about the cabinet design skills and matters needing attention.

设计技巧：

Design skills:

1、吸油烟机和灶具一组尽量不要紧贴侧墙，避免锅沿等与墙壁相抵触。

1, hood and cooker group as far as possible not to close to the side wall, avoid the side of the pot and other wall conflict.

2、橱柜靠墙一侧一定要考虑门口线的外突，避免门、抽屉及拉蓝的开合受到影响。

2, the cabinet must rely on the outer side of the door line against the wall side to avoid the opening and closing of doors, drawers and pulling blue.

3、水槽与灶具之间要留有足够使用空间，以800以上为宜，但也不宜过远，使得操作时来回的奔波。当然也须视具体的空间情况而定。

3, there should be enough space for use between the sink and cooker, with more than 800, but not too far. Of course, it also depends on the specific space situation.

4、注意配件的合理配置，虽然橱柜的配件品种多样，但适合每个厨房的配件并不同，能达到使用方便，功能性强即可。选择合理的配置，一要注意配件的标准化特点，二要清楚各种配件的安装方法和可能。因为各种配件如支撑件、推拉餐台、拉筐、升降柜等等项目繁多，需要用专业的眼光排除因为疏漏而造成的后果。

4, pay attention to the rational allocation of accessories, although the cabinet of various kinds of accessories, but suitable for each kitchen accessories and different, can be easy to use, powerful function. To choose a reasonable configuration, we must pay attention to the standardization features of accessories. Two, we should be clear about the installation methods and possibilities of various accessories. Because all kinds of accessories, such as supporting parts, push and pull tables, basket lifts, elevating cabinets and so on, require a professional eye to eliminate the consequences caused by oversight.

5、台面拐角的结合部必须有合理的面积范围，避免作用力的影响造成断裂。

5, the joint part of the corner must have a reasonable area to avoid the impact of the impact.

6、注意插座的预留位置，台面与吊柜之间的插座要远离水槽的位置，冰箱的插座最好设定在正墙一侧或上侧，还有厨宝、微波炉、吸油烟机、消毒柜、烤箱等等。

6. Pay attention to the reserved position of the socket. The socket between the table and the cabinet should stay away from the tank. The outlet of the refrigerator is best set on the side or the upper side of the wall. There are kitchen treasure, microwave oven, oil sucking machine, disinfector, oven and so on.

7、上下水口的位置，上水管道最好不低于400MM，便于衔接水龙头及厨宝等，下水管道的高度最好不要超过100MM或不低于200MM,使之在安装橱柜时，把柜体的动锯降低到最小。因为橱柜的底部都有调整脚,底板的位置一般介于100MM至140MM之间。

7, the position of the upper and lower water ports, the best water pipe is not less than 400MM, easy to connect the faucet and kitchen treasure and so on, the height of the sewer pipe should not exceed 100MM or not less than 200MM, so that when the cabinet is installed, the movable saw of the cabinet is reduced to a minimum. Because the bottom of the cabinet has adjusting feet, the position of the bottom plate is usually between 100MM and 140MM.

8、橱柜的标准尺寸，吊柜高700深300，地柜高800深550，吊地柜之间700，这一标准只能说是橱柜公司计算价格的参照，并非适合客户的需求及厨房的具体情况，设计师所要做的工作,是将自己的观念和感觉提供给客户做参考,并及时纠正客户因为不专业而做出的不切实际的想法,避免造成不必要的麻烦。

8, the standard size of the cabinet, the height of the cabinet 700 deep 300, the height of the cabinet 800 deep 550, and the 700 of the hoisting cabinet, this standard can only be referred to as the reference of the calculation of the price of the cabinet company, not the needs of the customers and the specific conditions of the kitchen. The work of the designer is to provide the customers with their views and feelings for reference and in time. Correct customers' unrealistic thoughts due to unprofessional and avoid unnecessary trouble.

注意事项：

Matters needing attention：

1、圆形和异形的柜最好不要设计，尽量避免。

1, the circular and special-shaped cabinets should not be designed and avoided as far as possible.

2、切角柜或浅柜的侧板净尺寸不得小于60MM，以免影响铰链底座的安装。

2. The net dimensions of the side panels of the corner cabinets or shallow cabinets shall not be less than 60MM, so as not to affect the installation of the hinge base.

3、欧式油烟机上最好不设计吊柜和搁板，中式油烟机上的吊柜最好设计上翻门，避免对开门，门板高度要下延50MM以上，底板改为前后档条。

3, it is best not to design a cabinet and shelf on the European type oil fume machine. The best design of the cabinet on the Chinese fume machine is to turn the door to the door to avoid opening the door. The height of the door plate should be extended over 50MM, and the floor is changed to the front and back files.

以上是为大家讲解橱柜设计技巧及注意事项，橱柜的设计是很重要的，如果设计不好，对整个厨房美观有很大的影响。

The above is to explain the cabinet design skills and attention, the design of the cabinet is very important, if the design is not good, it has a great impact on the beauty of the whole kitchen.