当前位置：网站首页 > 新闻动态
定制橱柜的优势
添加时间：2020/9/3 15:17:23     浏览次数：
基材的选择
Selection of substrate
传统的手工打制家具选用的基材多为木芯板、饰面板，市面上木芯板、饰面板等的产品很多都层次低劣，在环保、抗变形上很难达标。而量身定做的橱柜多采用的是环保E0级三聚氰胺板，经过工厂开料、封边、排孔、组装而成，拒绝采用含甲醇较高的胶水和油漆，其纹路清晰、防潮、抗变形、耐磨强、环保性高。
Traditional hand-made furniture is mostly based on wood core board and decorative panel. Many products on the market such as wood core board and decorative panel are of inferior level, which are difficult to meet the standards in environmental protection and deformation resistance. However, the custom-made cabinets are mostly made of environmental protection E0 melamine board, which is made by opening materials, sealing edges, arranging holes and assembling in the factory. It refuses to use glue and paint with high methanol content. It has clear lines, moisture resistance, deformation resistance, strong wear resistance and high environmental protection.
制作工艺
Manufacturing technology
一个柜体的工艺水准如何，封边极其重要，手工封边既不严实也不整齐，而工厂化的生产在制作方面就大大改善和提高了做工的精细程度和工艺水准，在制作周期上也大大的缩短时间，所有的工艺都是在工厂内一气呵成，到现场安装短时间就能完成。在保证封边的处理密封严实、线条流畅外、配上各种方便、时尚的五金件，巧妙结合，赋予家居更多人性化的理念，让我们的居室空间变得更加的和谐、舒适。
How about the technological level of a cabinet body, the edge sealing is extremely important. The manual edge sealing is neither tight nor neat, and the factory production greatly improves and improves the fine degree and process level of workmanship, and greatly shortens the time in the production cycle. All the processes are completed in one go in the factory and can be completed in a short time after installation on site. In addition to ensuring the sealing and smooth lines of the edge sealing, various convenient and fashionable hardware are added, which endows the home with more humanized concept and makes our living space more harmonious and comfortable.
价格
Price
就市场行情而言，自己买材料制作家具价格高于从大品牌整体橱柜厂家直接做。有人会问，为什么定做比请木工做还要便宜呢？因为大的品牌在采购方面采用的是集团采购，加上工厂化批量流水线生产，成本大大降低，专业做整体橱柜的商家谋求是量，而不是单个高额的利润，所以说，定制比打制划算。
As far as the market is concerned, the price of furniture made of materials purchased by oneself is higher than that from the whole cabinet manufacturers of big brands. Some people will ask, why is custom-made cheaper than inviting carpenters to do it? Because large brands use group purchasing in purchasing, and factory batch production line production, the cost is greatly reduced. The merchants who specialize in making the whole cabinet seek quantity rather than single high profit. Therefore, customization is more cost-effective than making.
寿命
life
从长期使用寿命来说，定做要比成品好，很多成品用的材料或设计都不是很到位，追求外表美观，像有些成品书柜、鞋柜，使用久了都会出现门脱落或板材变形，定做如果是有经验的设计师会在人体工程学上和力学上考虑得细致点！做出来的柜子相对比较结实。
In terms of long-term service life, customized products are better than finished products. Many finished products use materials or designs that are not in place. They pursue beautiful appearance. For example, some finished bookshelves and shoe cabinets, if they are used for a long time, their doors will fall off or their plates will deform. If they are made to order, experienced designers will consider carefully in ergonomics and mechanics! The cabinet is relatively strong.
空间
space
定制橱柜采用现场量尺定做的特点。充分利用了场地平面空间。通过技术革新，地台比市面上常见的高108mm减少了40mm，地台高度仅为60mm，地台的成功“瘦身”不但大大增加了柜体的收纳空间，提高了空间利用率，而且减磅后的地台稳重端庄中不失灵巧纤细，显得秀外慧中，大方得体。 定制橱柜最大的优势就是能充分合理地利用有效的空间，设计更人性化。它可以根据订户的需求任意设计，或者抽屉多，或者多隔板，而且还可以事先加进任何尺寸的拉篮，这些优点使它的整体性、随意性更高。整体橱柜的边框厚度从8毫米～10毫米不等，卡槽厚度的增加，保证了它的门可以有各种各样的款式，可以是镶玻璃的、镶铝合金的、带花纹的玻璃、带镜子的，各种款式，随意挑选。
Custom cabinet adopts the characteristics of on-site measurement. The plane space of the site is fully utilized. Through technical innovation, the platform is 108mm higher than the common one on the market, which is 40mm less, and the platform height is only 60mm. The successful "slimming" of the platform not only greatly increases the storage space of the cabinet body, but also improves the space utilization rate. The platform after weight loss is stable and dignified without failure, and it is delicate and graceful. The biggest advantage of custom cabinet is that it can make full and reasonable use of effective space and design more humanized. It can be arbitrarily designed according to the needs of subscribers, or more drawers, or more partitions, and can also be added in advance of any size of the basket, these advantages make its integrity, randomness higher. The thickness of the whole cabinet's frame varies from 8 mm to 10 mm. The increase of the thickness of the card slot ensures that the door can have a variety of styles, including glass inlaid, aluminum alloy inlaid, patterned glass and mirror, and various styles can be selected at will.
上一页  揭秘定制橱柜的猫腻，这10个问题你必须知道  
下一页  为什么说橱柜面积最大化反而不好用？