揭秘定制橱柜的猫腻,这10个问题你必须知道 |
添加时间:2021/1/19 15:49:50 浏览次数: |
说到厨房装修,很多人会选择定制橱柜,对于外行人来说,其中有很多猫腻是防不胜防的。
When it comes to the kitchen renovation, many people will choose
custom cabinets, for the uninitiated, of which there are many Maoni is
impossible to guard against the.
如果你想要定制出一款称心如意的橱柜,装修前你得问清楚这10件事。
If you want to customize a good cabinet, you have to ask the 10 things before the decoration.
1
One
问清楚柜体板的厚度
Ask the thickness of the cabinet.
市场上有16毫米、18毫米等厚度规格的板材,厚度不同成本相差很大,仅此一项18毫米厚的比16毫米厚板材成本高出7%。
The market has 16 millimeter, 18 millimeter and so on thickness
gauge plate, the thickness is different, the cost difference is very
big, only this 18 millimeter thickness is higher than the 16 millimeter
thickness plate cost 7%.
18毫米厚板材做出的橱柜使用寿命等能延长一倍以上,保证门板不变形,保护台面不开裂。
18 millimeter thick plate made of the cabinet service life can be
extended more than one times, to ensure that the door plate does not
deform, and the protection of the surface does not crack.
2
Two
问清楚是否是独立柜体
Ask if it is an independent cabinet
消费者可以通过包装和装好的柜体来鉴别,如果是独立柜体单柜组装的话,每个柜子都应该有一个独立的包装;
Consumers can identify them by packing and packing. If they are
assembled in a single cabinet, each cabinet should have an independent
package.
消费者还可以在柜体安装好台面前观察出来。
Consumers can also be observed before the cabinet is installed on the table.
3
Three
问清楚拼装方式
Find out how to assemble
一般小厂或手工现场打制的只能用螺丝铆钉或者胶合剂连接。
General small factory or manual site only with screws or rivets made of adhesive connection.
所以购买时,一定要问清拼装方式,最好是采用最新的第三代箱体棒榫结构加固定件及快装件的方式,这样能够更有效的保证箱体的牢固及承受力,而且少用胶合剂,更为环保。
So when buying, we must ask the assembly, it is best to use the new
third generation box bar tenon structure plus fixed parts and quick
pieces, it can be more effective to ensure strength and bearing box, and
use less glue, more environmentally friendly.
4
Four
问清楚后背板是单面封还是双面封
Ask whether the back plate is single or double-sided.
为节约成本,有的厂家偷工减料,对后背板只做单面封,看不到的一面是裸露的。
In order to save cost, some manufacturers steal material, only one
side seal is made to the back plate, and the invisible side is bare.
单面封后背板容易潮湿发霉,也很容易释放甲醛,造成污染,因此一定要双面封的。
Single seal backplate damp moldy easy, also easy to release formaldehyde pollution, so be sure to double seal.
5
Five
问清楚是否有防蟑静音封边
Asked whether there are anti cockroach mute edge
使用防蟑静音封边的柜体,柜门关闭时冲击力得以缓解,消除噪音,防止蟑螂等虫进入,有没有防蟑封边的成本相差3%。
The use of anti cockroach mute cabinet edge, the door closed when
the impact force can be alleviated, eliminate the noise, prevent
cockroaches and insects to enter, there is no anti cockroach edge cost
is 3%.
还要查看台面板、门板、箱体和密封条、防撞条是否经机器模压处理,是否正反两面一封压制而成。密封条封闭不严会造成油烟、灰尘、昆虫进入。
Also look at the panel, the door plate, the box and the sealing
strip, whether the anti-collision strips are pressed by the
machine,shuiniban.89ix.com
zhirongji.89ix.combaozhuangji.89ix.combaozhuang.89ix.comjianqiejif.89ix.com
tongshiziw.89ix.com whether or not it is both sides and one seal. The
seal of the seal is not strict, which will cause oil smoke, dust and
insects to enter.
6
Six
问清楚水槽柜铝箔的安装方法
Ask to clear the installation method of aluminum foil in the tank cabinet
问清安装方法是一次压制,还是用胶水粘贴。
Ask whether the installation method is a pressing or stickup with glue.
一次压制的密封性能更加完好,水、湿气不易渗透,更有效的保护柜体,延长橱柜使用寿命。
The sealing performance of one press is better, water and moisture
are not easy to permeate, and the cabinet is protected more effectively,
and the service life of the cabinet is prolonged. |
上一页 定制橱柜流程步骤 |
下一页 定制橱柜的优势 |
一键拨号:13902056721